These 17″ AMG Aero I Monoblock wheels measure 8″ in width all around and were manufactured in 1988 for use on Mercedes-Benz R107 and W/C126 AMG vehicles. The wheels are finished in silver and show part number 7400098. These are the earlier versions of the Aero I which do not have MB part numbers and feature the desireable premerger AMG script. The wheels have been professionally refinished in preparation for the sale. A full set of aftermarket AMG-style flat center caps will be included. These AMG wheels are now offered by the seller in Boca Raton, Florida with worldwide shipping available.
These 5-hole monoblock Aero I wheels have been professionally refinished and feature a silver finish across the faces and lips. The wheels are designed to fit W126 and R107 models. Up close photos of each face are provided in the gallery and the premerger AMG script can be seen on each with part number 7400098.
Each wheel measures 8" wide with an offset of +11. Close up photos of the back of each wheel are viewable in the gallery showing 1990 production dates. All four wheels feature a 5x112mm bolt pattern.
A full set of aftermarket AMG-style flat center caps will be included. Original size stampings are seen on each with photos provided. There are no major blemishes and each wheel is straight and true. The seller is able to assist with shipping at the buyer's expense.
Get the best of The MB Market directly in your inbox every day. Subscribe for a curated list of our top market listings and articles!
11 Comments
$1,850 bid placed by @BD450SL
$1,800 bid placed by @MBcharmer
$1,701 bid placed by @Lukehart
$1,651 bid placed by @BD450SL
$1,601 bid placed by @Lukehart
$1,551 bid placed by @BD450SL
$1,501 bid placed by @MBcharmer
$1,451 bid placed by @BD450SL
Hi @Carter07. Shipping to 19713 will cost $230 for residential and $200 for a non residential place.Shipping to 19713?Hi @Unai. Fedex Intl Economy is offering a last minute rate of around $350 to get it there by Freight.Hi, shipping cost to Spain? Zip cope 20005 ThanksHi @Cultivated. The 500E can fit this set without any modifications if it is not lowered. Your narrow body S124 will likely require fender rolling in the front and rear because it will stick out too far rubbing the fenders without doing so.Stupid question, I know the offset on these is lower than the 124 specification Aero 1s, but will these still clear a S124 without excessive rolling/modifications?$1,401 bid placed by @mickeybharat
Hi @benzgarden. These wheels were freshly painted faces & lips. Good luck to you in the auction.Are they painted or powder coated? I will be painting the face black so much easier if not powder coated. ThanksThese pre merger Aero 1's are getting so hard to find now, love them! Good luck with the sale @Smrlsn09$1,351 bid placed by @Carter07
$1,300 bid placed by @mickeybharat
$1,250 bid placed by @Carter07
$1,050 bid placed by @BD450SL
$800 bid placed by @Carter07
$650 bid placed by @Adamaldb
$600 bid placed by @Carter07
$550 bid placed by @mickeybharat
$500 bid placed by @BD450SL
In past auctions I have given shipping quotes generally as a ballpark figure from shipping so long. Rather than doing that I am now able to get exact quotes by putting in the info through Fedex. If anyone needs a shipping quote just send me your address along with zip code or an address close by and Il get an exact number thanks.Hi everybody! This Aero I Pre Merger Monoblock set is one I am really excited about. The Amg Logo is the original design. The part number, along with the dimensions & offset is presented on the face which was the design of pre merger. Post Amg styling had all of those things printed inside the wheel. The W126 and R107 models fit the car perfectly as mentioned in the literature. The reason is because of the 11 offset. This low number means that the wheels protrude outwards towards the fenders giving a flush look with the appropriate stance. Since the W126 & R107 have very wide fenders it becomes a perfect fit. Another popular model is the 500E. Since it has wide fenders it can handle the wheels pushing out. If the 500E has been lowered then fender rolling may be needed. Early model R129s from 1989-1993 can be an option as well. The wheels will sit very close to the fenders giving it a solid stance. I am here for any questions.